www.clare.com ds-PLA170-r03 1 PLA170 single-pole, normally open optomos ? relay rohs 2002/95/ec e 3 pb part # description PLA170 6-pin dip (50/tube) PLA170s 6-pin surface mount (50/tube) PLA170str 6-pin surface mount (1000/reel) parameter rating units blocking voltage 800 v p load current ac/dc configuration 100 ma dc configuration 180 ma max r on ac/dc configuration 50 dc configuration 14 applications features description ordering information pin configuration ? instrumentation ? multiplexers ? data acquisition ? electronic switching ? i/o subsystems ? meters (watt-hour, water, gas) ? medical equipment?patient/equipment isolation ? security ? aerospace ? industrial controls ? 800v p blocking voltage ? 3750v rms input/output isolation ? 100% solid state ? small 6-pin package ? low drive power requirements (ttl/cmos compatible) ? arc-free with no snubbing circuits ? no emi/rfi generation ? machine insertable, wave solderable PLA170 is a single-pole, normally open (1-form-a) solid state relay that uses optically coupled mosfet technology to provide en hanced input-to-output isolation of 3750v rms . the efficient mosfet switches and photovoltaic die use clare?s patented optomos architecture. the optically coupled output is controlled by a highly efficient gaaias infrared led. designed to replace electromechanical relays, the PLA170 offers the superior reliability associated with solid state devices, and provides bounce-free switching in a more compact surface mount or thru-hole package. switching characteristics of normally open devices approvals 1 3 2 4 5 6 + control C control nc load do not use load ac/dc configuration 1 3 2 4 5 6 + control C control nc + load C load dc only configuration form-a i f i load 10% 90% t on t off ? ul recognized component: file e76270 ? csa certified component: certificate 1175739 ? en/iec 60950-1 certified component: tuv certificate b 09 07 49410 004
www.clare.com 2 r03 PLA170 absolute maximum ratings are stress ratings. stresses in excess of these ratings can cause permanent damage to the device. functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. absolute maximum ratings @ 25oc parameter ratings units blocking voltage 800 v p reverse input voltage 5 v input control current 50 ma peak (10ms) 1 a input power dissipation 1 150 mw total power dissipation 2 800 mw isolation voltage, input to output 3750 v rms operational temperature -40 to +85 c storage temperature -40 to +125 c 1 derate linearly 1.33 mw / oc 2 derate linearly 6.67 mw / oc electrical characteristcs @ 25oc parameter conditions symbol min typ max units output characteristics load current, continuous ac/dc configuration 1 -i l -- 100 ma dc configuration 180 peak load current t=10ms i lpk - - 350 ma on-resistance 2 ac/dc configuration i l =load current r on --50 dc configuration - - 14 off-state leakage current v l =800v p i leak --1a switching speeds turn-on i f =5ma, v l =10v t on --5 ms turn-off t off --5 output capacitance v l =50v, f=1mhz c out -50-pf input characteristics input control current 3 i l =load current i f --5ma input dropout current - i f 0.3 0.7 - ma input voltage drop i f =5ma v f 0.9 1.2 1.4 v reverse input current v r =5v i r - - 10 a common characteristics input to output capacitance - c i/o -3-pf 1 load derates linearly from 100ma @ 25 o c to 90ma @80 o c. 2 measurement taken within 1 second of on-time. 3 for applications requiring high temperature operation (greater than 60 o c) a led drive current of 10ma is recommended.
PLA170 www.clare.com 3 r03 performance data* *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written speci? cations, please contact our application department. 0.30 0.40 0.50 0.60 0.35 0.45 0.55 turn-on (ms) device count (n) 25 20 15 10 5 0 typical turn-on time (n=50, i f =5ma, i l =100ma dc , t a =25oc) 0.070 0.080 0.090 0.085 0.075 turn-off (ms) device count (n) 35 30 25 20 15 10 5 0 typical turn-off time (n=50, i f =5ma, i l =100ma dc , t a =25oc) 35 30 25 20 15 10 5 0 39 41 43 45 40 42 44 device count (n) typical on-resistance distribution (n=50, i l =100ma dc , t a =25oc) on-resistance ( ) 0.65 1.17 1.69 0.39 0.91 1.43 1.95 led current (ma) device count (n) 25 20 15 10 5 0 typical i f for switch operation (n=50, i l =100ma dc , t a =25 o c) 25 20 15 10 5 0 0.65 1.17 1.69 0.39 0.91 1.43 1.95 led current (ma) device count (n) typical i f for switch dropout (n=50, i l =100ma dc , t a =25oc) 35 30 25 20 15 10 5 0 880 890 900 905 875 885 895 blocking voltage (v p ) device count (n) typical blocking voltage distribution (n=50, t a =25oc) 35 30 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 led forward voltage drop (v) device count (n) typical led forward voltage drop (n=50, i f =5ma, t a =25oc) typical turn-on vs. led forward current (i l =100ma dc ) led forward current (ma) turn-on (ms) 0 5 1015202530354045 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 50 typical turn-off vs. led forward current (i l =100ma dc ) led forward current (ma) turn-off (ms) 0 5 1015202530354045 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 50 typical led forward voltage drop vs. temperature led forward voltage drop (v) temperature (oc) 1.8 1.6 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 120 100 i f =50ma i f =10ma i f =5ma typical turn-on vs. temperature (i l =70ma dc ) turn-on (ms) -40 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 -20 0 20 40 60 80 100 temperature (oc) i f =5ma i f =10ma typical turn-off vs. temperature (i f =5ma, i l =70ma dc ) turn-off (ms) -40 0.20 0.18 0.16 0.14 0.12 0.10 0.08 0.06 0.04 0.02 0 -20 0 20 40 60 80 100 temperature (oc)
www.clare.com 4 r03 PLA170 performance data* *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written speci? cations, please contact our application department. typical i f for switch operation vs. temperature (i l =70ma dc ) led current (ma) -40 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -20 0 20 40 60 80 100 temperature (oc) typical i f for switch dropout vs. temperature (i l =70ma dc ) led current (ma) -40 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -20 0 20 40 60 80 100 temperature (oc) typical on-resistance vs. temperature (i f =5ma, i l =50ma dc ) -40 60 50 40 30 20 10 0 -20 0 20 40 60 80 100 temperature (oc) on-resistance ( ) load voltage (v) load current (ma) 150 100 50 0 -50 -100 -150 -6 -4 -2 0 2 4 6 typical load current vs. load voltage (i f =5ma, t a =25oc) typical maximum load current vs. temperature load current (ma) 220 200 180 160 140 120 100 80 60 40 temperature (oc) -40 -20 0 20 40 60 80 120 100 dc configuration ac/dc configuration i f =5ma i f =5ma i f =10ma typical blocking voltage vs. temperature blocking voltage (v p ) -40 1050 1000 950 900 850 800 750 700 -20 0 20 40 60 80 100 temperature (oc) typical leakage vs. temperature measured across pins 4&6 -40 0.040 0.035 0.030 0.025 0.020 0.015 0.010 0.005 0 -20 0 20 40 60 80 100 temperature (oc) leakage ( a) energy rating curve time load current (a) 10 s 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 1ms 100 s 100ms 1s 10ms 10s 100s
PLA170 www.clare.com 5 r03 manufacturing information moisture sensitivity all plastic encapsulated semiconductor packages are susceptible to moisture ingression. clare classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, ipc/jedec j-std-020 , in force at the time of product evaluation. we test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. this product carries a moisture sensitivity level (msl) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard ipc/jedec j-std-033 . device moisture sensitivity level (msl) rating PLA170 / PLA170s msl 1 esd sensitivity this product is esd sensitive , and should be handled according to the industry standard jesd-625 . reflow profile this product has a maximum body temperature and time rating as shown below. all other guidelines of j-std-020 must be observed. device maximum temperature x time PLA170 / PLA170s 250oc for 30 seconds board wash clare recommends the use of no-clean flux formulations. however, board washing to remove flux residue is acceptable. since clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. chlorine- or fluorine-based solvents or fluxes should not be used. cleaning methods that employ ultrasonic energy should not be used. rohs 2002/95/ec e 3 pb
www.clare.com 6 r03 PLA170 mechanical dimensions dimensions mm (inches) pcb hole pattern 6.350 0.127 (0.250 0.005) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) 5.080 0.127 (0.200 0.005) 6 - 0.800 dia. (6 - 0.031 dia.) 0.254 0.0127 (0.010 0.0005) 9.144 0.508 (0.360 0.020) 7.239 typ (0.285 typ) 7.620 0.254 (0.300 0.010) 3.302 0.051 (0.130 0.002) 4.064 typ (0.160 typ) 0.457 0.076 (0.018 0.003) 8.382 0.381 (0.330 0.015) 2.54 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 1.651 0.254 (0.065 0.010) dimensions mm (inches) pcb land pattern 0.254 0.0127 (0.010 0.0005) 7.620 0.254 (0.300 0.010) 0.635 0.127 (0.025 0.005) 3.302 0.051 (0.130 0.002) 4.445 0.254 (0.175 0.010) 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 8.382 0.381 (0.330 0.015) 2.54 0.127 (0.100 0.005) 9.524 0.508 (0.375 0.020) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 1.651 0.254 (0.065 0.010) 1.651 0.254 (0.065 0.010) PLA170 PLA170s
clare, inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publica tion and reserves the right to make changes to specifications and product descriptions at any time without notice. neither circuit patent licenses nor indemnity are expressed or implied. except as set forth in clare?s standard terms and conditions of sale, clare, inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products incl uding, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. the products described in this document are not designed, intended, authorized or warranted for use as components in systems in tended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of clare?s product may result in direct physical harm, i njury, or death to a person or severe property or environmental damage. clare, inc. reserves the right to discontinue or make changes to its products at any time without notice. specification: ds-PLA170-r03 ?copyright 2010, clare, inc. optomos? is a registered trademark of clare, inc. all rights reserved. printed in usa. 8/13/2010 for additional information please visit our website at: www.clare.com PLA170 7 notes: 1. all dimensions carry tolerances of eia standard 481-2 2. the tape complies with all notes for constant dimensions listed on page 5 of eia-481-2 dimensions mm (inches) embossment embossed carrier 330.2 dia (13.00 dia) top cover tape thickness 0.102 max (0.004 max) w=16.00 (0.63) b 0 = 10.10 (0.398) a 0 = 10.10 (0.398) p = 12.00 (0.472) k 1 = 3.80 (0.15) k 0 = 4.90 (0.19) user direction of feed PLA170s tape & reel
|
